Crash Pads
Crash Pads made in the UK for climbers, by climbers.
- Bags
- Belay Bags
- Cellar Board
- Chalk Bags
- ClimbLab Products
- Clothing
- Coastal
- Commercial
- Core
- Core Matting
- Crash Pads
- Down Climb Jugs
- Fixings
- Fold Up
- Fontainebleau
- Geo
- Granite
- Grit
- Holds
- Home Wall
- Hoodies
- Kids
- Limestone
- Merchandise
- Mixed
- Sewn Goods
- Specialist Equipment
- Training
- Tshirts
- Uncategorised
-
Workhorse Crash Pad
The Workhorse is the main feature of our Outdoor Bouldering matting, it is an all rounder suitable for use at any crag in any condition. Made from 1100 denier Cordura, it is incredibly tough. High contact areas prone to getting caught on rocks or trees such as corners are re-enforced. High quality polyester webbing is used throughout and any high-stress areas in the seams are industrially bar-tacked for extra strength. One of the main features of our Outdoor matting series is the stackable element, the ability to carry many pads to the crag has never been easier. When in use a heavy-duty flap covers the shoulder and waist straps to keep them out of the dirt, then when carrying in/out of the crag or between boulders the cover flap folds round to lash together any additional pads your need. All of our products are made in the Core Climbing factory in Sheffield, and our new range of crash pads are no exception. Hand sewn by our expert machinists with years of experience.
Read more
-
Nucleus
The Nucleus is our sit start crash pad, made from 25mm high density closed cell foam and measuring at 1000 x 600mm this sit pad integrates itself with the Workhorse mat perfectly when folded. Making stacking and carrying a piece of cake. The size and low profile of this little pad make it perfect for those low hanging starts, for covering gaps in-between pads, or for additional pad coverage for spotting. Fully encased in high quality 1D Cordura this little pad is tough, and the convenient 450mm carpet corner allows you to wipe dirt off your shoes easily.
Read more
-
Reactor
The Reactor - Half pad is an ideal ground for squeezing into those areas that a full sized pad won't fit in, it can be used to bulk out or level landing zones and is the perfect bridge between the full size crash pad and the convenience of a sit pad. Measuring at 1000 x 600mm this mat is the same footprint as the Workhorse when folded, allowing it to be stacked and carried easily. Made up of 25mm of high density closed cell foam and 50mm open cell foam, this mat is a great addition to the rest of the series.
Read more
-
Titan Crash Pad
The Titan is a super-sized version of the workhorse and the biggest pad in our outdoor bouldering matting range, it is the perfect crash pad for those looking for a large fall zone. Made from 1100 denier Cordura, it is incredibly tough. High contact areas prone to getting caught on rocks or trees (corners, edges) are re-enforced. High quality polyester webbing is used throughout and any high-stress areas in the seams are industrially bar-tacked for extra strength. One of the main features of our Outdoor matting series is the stackable element; the ability to carry many pads to the crag has never been easier. When in use a heavy-duty flap covers the shoulder and waist straps to keep them out of the dirt, then when carrying in/out of the crag or between boulders the cover flap folds around to lash together any additional pads you need. All of our products are made in the Core Climbing factory in Sheffield, and our new range of crash pads are no exception. Hand sewn by our expert machinists with years of experience.
Read more
-
Helios
The purpose of the Helios 'Duvet' pad is to cover the irritating and dangerous gaps that can form between crash pads whilst climbing. It can also be used to add additional padded surface area for spotters or other climbers to move around, or for making your lunch on. Encased in 1100D Cordura® fabric this pad is made to last. Inside is one single sheet of high quality closed cell foam to ensure that an uninterrupted landing surface can be achieved. Measuring at 2000 x 1000mm, 30mm thick when unfolded, and 1000 x 500mm when folded into quarters, it conveniently stacks into the carry system of the Workhorse and Titan pads. Making carrying it around the crag a piece of cake!
Read more
-
Crash Pad Bundle 1
This crash pad bundle consists of X 1 Workhorse pad, X 1 Reactor Half pad and X 1 Nucleus Sit Pad. With the unique stacking system and different sizes of pads this bundle is incredibly versatile and will all you could need for a day out at the crag. All at a reduced price!
Read more
-
Crash Pad Bundle 2
This bundle consists of; X 1 Workhorse pad, X 1 Nucleus sit pad and X 1 Helios Duvet pad. The Helios duvet combined with the Nucleus sit and Workhorse pads allows this setup to be used in a number of different ways based on the requirement set by the boulder. Whether it be more spotting space whilst keeping your shoes clean, covering gaps between pads or just sitting down to have some lunch. This set up has got you covered.
Read more
-
Crash Pad Bundle 3
This crash pad bundle consists of X 2 Workhorse pads and X 1 Nucleus sit pad. The stackable feature of our crash pads means that all the elements of this bundle can be carried with relative ease. Having the reassurance of a second full sized pad is perfect for those looking for a big more cushion in their landing.
Read more
